Rivet Nuts (Insert Nuts)

Reduced Hex Head Inner-Hex Body Rivet Nut

Reduced hex head, inner-hex (half-hex) body, open end. M3 to M12, carbon steel, zinc plated.

Section: Rivet nuts
Type: Steel rivet nuts

Overview

A rivet nut (insert nut) gives a strong, reusable thread in sheet metal, tube or plastic that is too thin to tap. It is fitted from one side with a hand or pneumatic tool. The thin reduced head sits almost flush with the panel. The half-hex body sits in a hex hole and resists spinning under torque.

The open end lets a longer screw pass right through. Available from M3 to M12 with grip ranges from 0.5 mm to 7 mm. Each part number covers a set range of sheet thickness and has its own overall length (L), shown in the table.

Specifications

Brand	Neufix
Part no. series	NF-RHH-IHB
Threads	M3, M4, M5, M6, M8, M10, M12
Grip range	0.5 mm to 7 mm
Length (L)	8.5 mm to 28 mm
Head	Reduced hex head
Body	Inner-hex (half-hex) body
End	Open end
Material	Carbon steel, zinc plated

Sizes & part numbers

Part no.	Thread	Grip range (mm)	Length L (mm)
NF-RHH-IHB-0315	M3	0.5-1.5	8.5
NF-RHH-IHB-0325	M3	1.5-2.5	10.5
NF-RHH-IHB-0420	M4	0.5-2.0	12.0
NF-RHH-IHB-0440	M4	2.0-4.0	14.0
NF-RHH-IHB-0525	M5	0.5-2.5	13.0
NF-RHH-IHB-0540	M5	2.5-4.5	15.0
NF-RHH-IHB-0635	M6	1.0-3.5	15.5
NF-RHH-IHB-0650	M6	3.5-5.0	18.0
NF-RHH-IHB-0830	M8	1.0-3.0	17.0
NF-RHH-IHB-0850	M8	3.0-5.0	20.0
NF-RHH-IHB-1040	M10	1.0-4.0	21.0
NF-RHH-IHB-1060	M10	4.0-6.0	23.0
NF-RHH-IHB-1040(12H)	M10	1.0-4.0	19.5
NF-RHH-IHB-1240	M12	1.0-4.0	24.2
NF-RHH-IHB-1260	M12	4.0-7.0	28.0