Flush Head Pins
Unthreaded locating pins with a flush head, 3 to 6 mm.
Self-Clinching & Weld Fasteners
Flush Head Studs
Studs that press in flush, M2 to M8, lengths 5 to 50 mm.
- Section
- Self-clinching
- Type
- Studs & pins
Overview
Flush head studs are pressed into a drilled or punched hole until the head sits flush with the sheet. The serrated head locks against rotation and the sheet flows into the undercut, giving a permanent, high-strength threaded stud in sheet as thin as 1 mm.
Full dimensions, preferred lengths and installation / push-out / torque-out performance data are shown in the datasheet below, taken from the self-clinching fasteners catalogue.
Specifications
| Part numbers | KB-FH, KB-FHS, KB-FH4, KB-FHA |
|---|---|
| Zinc Plated Steel | KB-FH |
| Stainless Steel | KB-FHS |
| 400 Series Stainless Steel | KB-FH4 |
| Aluminium | KB-FHA |
| Sizes | M2, M2.5, M3, M3.5, M4, M5, M6, M8 |
| Sheet hardness (KB-FH) | HRB 80 or less |
Datasheet
Dimensions, preferred lengths and performance data from the self-clinching fasteners catalogue.
Key features
- Head flush with the sheet
- Steel, stainless, 400-series stainless and aluminium
- High torque-out and push-out
Applications
Electrical enclosuresChassis and framesEarthing pointsAppliances
Need a size, grade or finish not listed?We also supply special and non-standard parts to drawing.Send enquiry
More self-clinching
High Strength Studs
Hex-head clinch studs for high torque, M5 to M10.
High Strength Studs for Thin Sheets
High-strength studs designed for thin sheet metal.
Low Displacement Flush Head Studs
Flush studs that disturb the sheet very little, close to edges.
Concealed Head Studs
Studs fitted into a blind hole so the reverse side stays untouched.
Thin Sheet Studs
Flush studs for very thin sheet metal.