Flush Head Studs
Studs that press in flush, M2 to M8, lengths 5 to 50 mm.
Self-Clinching & Weld Fasteners
Low Displacement Flush Head Studs
Flush studs that disturb the sheet very little, close to edges.
- Section
- Self-clinching
- Type
- Studs & pins
Overview
Low displacement studs need less installation force and displace less material, so they can be placed closer to the edge of the sheet and to bends without distorting the part.
Full dimensions, preferred lengths and installation / push-out / torque-out performance data are shown in the datasheet below, taken from the self-clinching fasteners catalogue.
Specifications
| Part numbers | KB-FHL, KB-FHLS |
|---|---|
| Zinc Plated Steel | KB-FHL |
| Stainless Steel | KB-FHLS |
| Sizes | M2.5, M3, M4, M5 |
| Sheet hardness (KB-FHL) | HRB 80 or less |
Datasheet
Dimensions, preferred lengths and performance data from the self-clinching fasteners catalogue.
Key features
- Low installation force
- Close to edges
- Steel and stainless
Applications
Small enclosuresElectronicsBrackets near bendsThin panels
Need a size, grade or finish not listed?We also supply special and non-standard parts to drawing.Send enquiry
More self-clinching
Flush Head Pins
Unthreaded locating pins with a flush head, 3 to 6 mm.
High Strength Studs
Hex-head clinch studs for high torque, M5 to M10.
High Strength Studs for Thin Sheets
High-strength studs designed for thin sheet metal.
Concealed Head Studs
Studs fitted into a blind hole so the reverse side stays untouched.
Thin Sheet Studs
Flush studs for very thin sheet metal.